W4-3, Photoelectric retro-reflective sensor, Standard optics Sick WL4-3P2130 (1028146)

1.00руб.

Узнать стоимостьЗаказать
Позвоните по телефону: +7 (495) 409-66-13

Описание

Photoelectric sensors
W4-3, Photoelectric retro-reflective sensor, Standard optics
 
Model Name WL4-3P2130
Part No. 1028146
 

Самое главное

  		•  Fixed setting or setting via teach-in pushbutton
  		• PinPoint LED technology for highly visible, intense light spot
  		• Sensing range from 0.01 — 4 m
  		• Rugged plastic housing with M3 threaded metal inserts

    Преимущества

  		•  The PinPoint LED’s sharply defined, intense light spot simplifies alignment
  		• Low-cost machine integration due to small dimensions that enable mounting in areas with tight space restrictions
  		• Rugged mounting system with M3 threaded metal inserts reduces maintenance costs due to a long service life
     
             
     
     

    Features
    Dimensions (W x H x D): 16 mm x 39.5 mm x 12 mm
    Sensing range max.: 0.01 m … 4 m 1)
    Sensing range: 0.02 m … 3.5 m 2)
    Housing design (light emission): Rectangular, Flat
    Light source: PinPoint LED 3)
    Type of light: Visible red light
    Wave length: 650 nm
    Light spot diameter (distance): O 75 mm (1.5 m)
    Sensor/detection principle: Photoelectric retro-reflective sensor, Standard optics
    1) 2) PL80A  3) Average service life 100,000 h at Ta = +25 °C  
    Mechanics/electronics
    Enclosure rating: IP 67
    IP 66
    Supply voltage: 10 V DC … 30 V DC 1)
    Residual ripple: 2)
    Power consumption: ≤- 20 mA 3)
    Switching output: PNP, Light-switching
    Output current Imax.: ≤- 100 mA
    Response time: 4)
    Switching frequency: 1,000 Hz 5)
    Connection type: Connector M8, 3-pin
    Protection class: III
    Circuit protection: A, C, D 6) 7) 8)
    Weight: 30 g
    Housing material: ABS
    Optics material: PMMA
    Ambient operating temperature: -40 °C … 60 °C
    Ambient storage temperature: -40 °C … 75 °C
    Polarisation filter: Yes
    UL File-No.: UL No. NRKH.E181493 & cUL No. NRKH7.E181493
    1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) A = VS connections reverse-polarity protected  7) C = interference suppression  8) D = outputs overcurrent and short-circuit protected  

    *изображение на сайте может отличаться от реального